Q26 Rubber Mat and Tile Surfacing
Q26 Special surfacing/pavings for sport/general amenity
Impact Absorbing Surfacings for Play Areas
300 EXTENT OF IMPACT ABSORBING SURFACING
- General: Lay to the impact areas shown in the relevant parts of BS EN 1176.
301 EXTENT OF IMPACT ABSORBING SURFACING
- General: Lay impact absorbing surfacing as indicated on drawings.
340A RUBBER MAT AND TILE SURFACING
- Base: Topsoil and turf
- Surface Course: Impact absorbing EPDM rubber mats and/ or tiles.
– Standard: To BS 7188
– Manufacturer: Soft Surfaces Ltd, 35 Water Lane, Wilmslow, SK9 5AR
– Tel: 01625 445760, Fax: 01625 525619
– Email: firstname.lastname@example.org Website: www.softsurfaces.co.uk
– Product reference: Soft Surfaces Grass Mats / Grass Protection Mats
– Colour: Black
– Critical Fall Height when tested to BS EN 1177: TBC
– Health and Safety: CHAS accredited, API accredited, CONSTRUCTIONLINE accredited
Substance known to be toxic or carcinogenic on skin or released as vapour or dust during normal use: Not permitted.
– Resistance to abrasive wear, slip resistance, resistance to indentation and ease of ignition: Evidence of testing to BS 7188.
– Critical Fall Height: Evidence of testing to BS EN 1177.
920 PLAY SURFACE TESTING
- Standard: To BS EN 1177 and BS 1177, where applicable.
- Testing Body: A United Kingdom Accreditation Service (UKAS) independent laboratory.
- Timing: Within ten days of completing the surface works.
- Test Results: Submit.
- General: For all types of surfacing, provide the following:
– Name and contact details of installer.
– Date of installation.
– Name and contact details of manufacturer.
– Type/ description/ reference of products used.
– Manufacturer’s recommended inspection and maintenance procedures to maintain safety and impact absorbing performance.
– Manufacturer’s recommended cleaning and maintenance methods, where relevant.
- Signs: Provide permanent labelling in approved locations on all types of surfacing stating:
– Critical Fall Height;
– Date of Installation
– Manufacturer’s name and contact details; and Product name.